Directions for Use:

1. Attach air stone to pump.


2. Take the required amount of Triton Restoration Formula™ and Triton Sediment Digester™ and pour into clean 55-gallon drum.


3. Add one packet of Activator per gallon of concentrate used.


4. Add the required amount of water to the clean drum. (10-acre foot kits and 32-acre foot kits require 50 gallons of water for mixing/dilution; the 5-acre foot kit requires 25 gallons of water in the mixing drum.)


5. Insert tube with the aeration stone into the 55-gallon drum. Make sure the stone is firmly secured to the tube. It’s best if stone lies flat on drum bottom.


6. Run the aeration process for 48 hours.


7. After aeration process is complete, remove the stone and tubing.


8. Evenly distribute finished product around the lake or pond; avoid dumping the finished product into one central location.

Do Not let the finished product sit in drum for longer than 12 hours after the aeration process has been completed. For best results add the finished product to the lake or pond immediately upon completing the aeration process.

• For Optimum Results make sure the water has a minimum dissolved oxygen level of 5%-6%.
• Dissolved Oxygen Levels below 2%-3% will reduce the efficacy of the products. This low level of dissolved oxygen also stresses marine life, even leading to their death.